Stingray Earth Anchors
STINGRAY EARTH ANCHORS - Superior Heavy Duty Earth Anchors
STINGRAY earth anchors are the perfect solution for applications with heavy capacity requirements because they provide superior holding for civil construction jobs, excavation shoring and tiebacks. STINGRAY anchors have a maximum working load of 35 tons.
Once driven to the proper depth, a hydraulic anchor locker pulls up on the anchor rod, rotating the anchor into undisturbed soil like a toggle bolt. Anchors are simultaneously load locked and proof tested to ensure the capacity requirements are safely met.
STINGRAY Ground Anchor
STINGRAY EARTH ANCHORS - Approved Suppliers and Installers
STINGRAY® anchors, a patented labour and time saving device, work like a toggle bolt in soil. The anchors are driven into the ground with conventional equipment (with no excavation and no grout), providing a safe and environmentally sensitive installation. After driving the anchor to the required depth, the drive steel is removed and an upward pull on the anchor rod rotates the STINGRAY into a perpendicular “anchor lock” position in undisturbed soil.
After the anchor is tipped it can be simultaneously load tested. The result: superb holding capacities. STINGRAY anchor systems offer breakthrough earth anchoring technology for applications where heavy capacities are required.
Stingray earth anchor
STINGRAY Earth Anchor Supplier & Installer
There are three STINGRAY® anchor models. STINGRAY anchors are made of hot dip galvanized ductile iron. Structurally compatible anchor rods and end terminations for guy line or retaining structures are available for all anchor models.
- Civil Engineering Applications
- Utility Applications
- Guy stays for masts and sail structures.
- Pipelines
Stingray anchors
Stingray Earth Anchor Types & Sizes
GALVANISED DUCTILE IRON ANCHOR HEADS
SR-1
440kN Ultimate Strength Anchor – Working load (2-1 safety factor) 220kN. This anchor is hot-dipped galvanised and designed to be used in harder soils. It accepts anchor rods 25-38mm with a bearing surface of 741cm².
SR-2
440kN Ultimate Strength Anchor – Working load (2-1 safety factor) 220kN. This anchor is hot-dipped galvanised and designed to be used in normal soils. It accepts anchor rods 25-38mm with a bearing surface of 1,612cm².
SR-3
440kN Ultimate Strength Anchor – Working load (2-1 safety factor) 220kN. This anchor is hot-dipped galvanised and designed to be used in softer soils. It accepts anchor rods 25-38mm with a bearing surface of 2,419cm².
