Manta Ray Earth Anchors
MANTA RAY EARTH ANCHORS - Heavy Duty Earth Anchors
SUTTS Group offers Manta Ray Earth Anchors in various sizes for different holding capacities.
MANTA RAY anchors are driven tipping plate soil anchors for the reaction of tensile loads. MANTA RAY anchors have ultimate capacities of up to 20 tons. The simple, effective, low-cost MANTA RAY anchor system represents a breakthrough in anchoring technology with many uses in the Utility, Civil Engineering and Marine Markets.
Manta Ray Ground Anchor
MANTA RAY EARTH ANCHORS - Approved Suppliers and Installers
MANTA RAY anchors are driven tipping plate soil anchors for the reaction of tensile loads. MANTA RAY offers cost reductions for installation and repairing walls, sheet piles, and seawalls.
Many customers utilise MANTA RAY anchors to shore up, stabilise, and repair failing walls with superb economic advantages. The bottom line is that MANTA RAY solves all your anchoring problems.
MANTA RAY EARTH ANCHORS australia
We Supply & Install Manta Ray Earth Anchors across Western Australia.
MANTA RAY® anchors, a patented labour and time-saving device, are driven into the ground with no holes, digging, or concrete. Unlike other anchoring systems, the MANTA RAY compacts the soil around itself, providing a safe and environmentally sensitive installation.
The anchors are driven by conventional hydraulic/pneumatic equipment that is readily available worldwide. Once driven to the proper depth, an upward pull on the anchor tendon rotates the MANTA RAY into a perpendicular “anchor lock” position in undisturbed soil. A gauge on the anchor locker measures proper holding capacity. Each anchor is immediately proof-loaded to the exact capacity required.
- Utility Applications
- Civil Engineering Applications
- Erosion Control Applications
- Specialized Applications
- Marine Applications
Block Walls
- Seawalls
- Sheet pile
- Pipelines
- Scaffolding
- Foundation Stabilization
- Temporary Structures
Manta Ray Ground anchors Australia
Manta Ray Earth Anchor Info & Guides
Manta Ray anchors
Manta Ray Earth Anchor Types & Sizes
GALVANISED DUCTILE IRON ANCHOR HEADS
MR-88
22Kn Ultimate Strength Anchor -Tough light-duty anchor for maximum loads in normal/hard soils. The most used anchor in our range. Coupled with M12 galvanised thread bar.
MR-3
89Kn Ultimate Strength Anchor—Working loads (2-1 safety factor) 45 Kn. It is hot-dipped galvanised and designed for medium loads in normal/hard soils. Coupled with M20/M24 tread bar
MR-2
178Kn Ultimate Strength Anchor – Working loads (2-1 safety factor) 89Kn. This anchor is hot-dipped galvanised and designed to be used exclusively in hard/dense/cobble soils. Coupled with M20/M24 tread bar
MR-1
178Kn Ultimate Strength Anchor – Working loads (2-1 safety factor) 89Kn. This anchor is hot-dipped galvanised and designed for use in normal/medium soils. Coupled with M20/M24 tread bar
MR-SR
178Kn Ultimate Strength Anchor – Working loads (2-1 safety factor) 89Kn. This is the largest of the most commonly used MANTA RAY anchors. It is hot-dipped galvanised and designed to be used in “softer” soils. Coupled with M20/M24 tread bar
